Home / Services

Every stage of the job, from one team.

Design, supply, installation, testing and maintenance across electrical, mechanical and civil disciplines, so your site deals with one contractor instead of five.

LV / MV up to 33 kV

Electrical & instrumentation

From a new 11 kV feeder to a factory rewire, we install, terminate, test and commission the systems that power your site, and leave you the records to prove it.

Electrical & instrumentation

Power distribution

  • Substation construction
  • Transformer and switchgear installation and commissioning, LV and MV to 33 kV
  • Overhead line construction, 11 kV and 33 kV
  • Cable laying, termination and jointing
  • Auto-recloser supply and installation

Site & building systems

  • Industrial and commercial wiring
  • Generator installation with automatic changeover
  • Street and area lighting projects
  • Air conditioning installation, servicing, repair and re-gassing

Protection & power quality

  • Primary injection testing of protection relays
  • Power factor correction equipment
  • Energy management systems
  • Power quality measurement and analysis

Instrumentation

  • Transmitters, valves and flow meters
  • Loop checks and calibration support
  • Automation and control panels

Best practice

Commissioning is where faults are cheapest to find. A complete MV handover should include insulation resistance and polarisation index results, transformer ratio and vector group checks, contact resistance on switchgear, primary injection of protection with recorded trip times, and phase rotation, all checked against the protection settings study.

Authorised CompAir dealership

Compressors & generators

Compressed air and standby power are the utilities nobody notices until they stop. Our compressor and diesel technicians keep them running, whatever the brand.

Compressors & generators

Compressors

  • Dealer for CompAir compressors and blowers: more than 400 products
  • Oil-lubricated and oil-free rotary screw and reciprocating units
  • Centrifugal compressors, dryers, filters and downstream accessories
  • Airend overhaul as a cost-effective alternative to replacement
  • Service on CompAir-Elgi, Atlas Copco, Boge and Ingersoll units

Generators

  • Service and repair on any brand
  • Installation, synchronisation and automatic changeover
  • Load bank and functional testing
  • Shelter and enclosure works
  • Caterpillar
  • Cummins
  • FG Wilson
  • Kipor
  • GESAN
  • Atlas Copco

Best practice

Compressed air is often the most expensive utility on a plant, and leaks routinely waste a quarter of what is generated. Pair servicing with a leak survey, set pressure no higher than the process needs (each 1 bar less saves roughly 7% of energy), and trend airend vibration and oil analysis so you can plan an overhaul instead of suffering a failure.

Pumps · pipe · tanks · pressure

Mechanical, pumps & pipework

Structural steel, rotating equipment and fluid systems, installed square, aligned and pressure tested before anything goes into service.

Mechanical, pumps & pipework

Mechanical engineering

  • Structural engineering
  • Machine installation and alignment
  • Pipe works
  • Pump, pipe and tank installation
  • Pressure testing of air receivers and boilers
  • Hydraulic hose crimping

Pumps, blowers & parts

  • Gardner Denver liquid-ring vacuum pumps
  • Centrifugal and screw vacuum pumps, blowers
  • Warman and Weir slurry pump spares (AOJIN equivalents)
  • HDPE pipe butt-fusion welding

Best practice

Most early pump and motor failures come from misalignment and pipe strain. Laser-align couplings to the manufacturer’s tolerance, support pipework so the pump casing carries no load, and hydro-test new pipework to the design code, typically 1.5 times design pressure, with a recorded hold period before commissioning.

Precision & heavy fabrication

Metal fabrication & precision engineering

Our workshop builds wear parts and plant steelwork for FQML Kalumbila, Lumwana and Puma Energy, delivered on time, to drawing and to the standard a mine expects.

Metal fabrication & precision engineering

Plant & materials handling

  • Skip bins and oversize chutes
  • Conveyor walkways and access platforms
  • Rubber-lined nozzles and lined components
  • Wing nuts and machined fittings

Structures & enclosures

  • Stainless steel camera canopies
  • Fuel station canopies
  • Handrails, guards and barriers
  • Custom fabrication to client drawings

Best practice

Good fabrication starts before the first cut. Ask for a weld procedure for the material and thickness, a dimensional check against the drawing before coating, and surface preparation to the paint system’s specification. Wear parts last far longer when the liner material is chosen for the actual ore and impact angle.

Renovation · new build

Civil engineering

The ground work and buildings that equipment depends on: plinths, shelters, drainage and industrial buildings, built alongside our electrical and mechanical crews.

Civil engineering

Construction

  • General civil engineering works
  • Commercial and industrial buildings
  • Renovations, extensions and new builds
  • Soakaways, septic tanks and drainage

Maintenance

  • Infrastructure and building maintenance
  • Painting and repairs
  • Equipment shelters and plinths

Best practice

Foundations for transformers and generators need to carry static load, vibration, an oil bund and cable entry. Agree the plinth design with the electrical layout before casting, so ducts, earthing and drainage are in the right place the first time.

Light & heavy vehicles

Automotive engineering

Fleet vehicles are part of production. We repair and rebuild them so site teams keep moving.

Repairs & rebuilds

  • Repair of all kinds of motor vehicles
  • Engine and gearbox rebuilds
  • Troubleshooting and diagnostics
  • Supply of spares and service kits

Bodywork & accessories

  • Panel beating and spray painting
  • Cabin tents for pickups and tippers
  • Key cutting for all vehicles

Supply · training

General supplies & training

The parts and people your maintenance programme depends on, sourced and trained by engineers who use them.

Supplies

  • Electrical power and control cables
  • Indoor and outdoor auto-reclosers
  • Protection relays and associated products
  • Instrumentation: transmitters, valves, flow meters
  • Flameproof cable couplers, adaptors and accessories
  • Power line construction accessories
  • Cable jointing kits, trailing cable plugs and sockets
  • Personal protective equipment

Training

  • Engineering courses tailored to your plant
  • Safety courses for site teams
  • Administrative courses
  • Drill rig maintenance and repair training
  • Delivered on site for mining companies and industry across the region

Questions buyers ask

Before you send the enquiry.

If your question isn’t answered here, call our office on +260 955 552 791.

Do you work outside Zambia?

Yes. We support mining and heavy industry clients in Zambia, Malawi and the Democratic Republic of Congo, both directly and as part of joint ventures and subcontracts.

Can you work as a subcontractor to our main contractor?

Yes. We regularly secure work through partnerships, including joint ventures, consortia, subcontracts and specialist partnerships, as well as on our own.

Do you only service CompAir compressors?

No. We are a CompAir dealer, but our technicians also service Atlas Copco, Boge, Ingersoll and CompAir-Elgi compressors, and generators from Caterpillar, Cummins, FG Wilson, Kipor, GESAN, Atlas Copco and other makers.

What should I include in an enquiry?

Your site location, the equipment involved (make, model and rating if known), what has happened or what you need built, any drawings or photos, and your target dates. This lets us send the right specialist and give you a firmer price.

Need a price for this scope?

Send us drawings, photos or a short description. We’ll come back with questions or a quote.

Request a quote